SPECIAL FEATURES ON VISION 180 TRIMMERS

Your Vision 180 Beard & Mustache Trimmer has many advanced features, designed to help you get perfect results every time you trim.

An Ergonomic Shape for added comfort, designed so you always hold the trimmer in a comfortable position for precision trimming. The shape also provides optimum trimming visibility.

A Lighted, Rotating Head. The trimming head rotates 180 degrees, providing two trimming positions. This allows you to achieve the optimum ergonomic relationship between the hand, the trimmer and the face. Rotate the head to the desired position as follows: With the switch in the "O" OFF position, depress the lock button and rotate the head in the direction of the arrow indicated on the trimmer above the button until the other arrow is aligned.

The built-in light eliminates shadows, providing better visibility of the area you are trimming, especially under the chin and in areas where available light doesn't reach. A three-position power switch turns the trimmer on, with or without the light. There is no need to use the light when using the trimming guide. To prolong light bulb life, trim without the light when room lighting is adequate. If the light bulb fails, do not attempt to replace it. It may be replaced by the Wahl repair department.

A 6-Position AccuLockTM TRIMMING GUIDE makes achieving a consistent trim easy, every time. The guide can be removed (providing a seventh cutting position) and reattached without changing the preset cutting length, so once you have found the perfect length, there's no guesswork in achieving it every time. The trimming guide is a two-piece assembly, consisting of a base and a comb. It should not be disassembled. To attach the guide, simply slide it on at a slight angle and press the release tab down to secure in position. To remove the guide, gently push up on the release tab and slide the assembly away from the trimmer. Adjust the trimming length by pressing on the thumb lever and moving the comb forward or backward to the desired setting.

TRIMMING YOUR MUSTACHE
Comb your mustache.

Hold the trimmer in a vertical position, with the switch facing you. Make sure the head is rotated so that the blades are pointing toward you in order to define the line of your mustache.

Rotate the head as shown and attach the 6-position trimming guide. Then, with the attachment set at a fairly long trimming length, begin trimming your mustache, starting at the top and working down to your upper lip. Use progressively closer settings to get the look and length you desire.

For tapering the mustache, rotate the head so that the switch and blades point away from you. Set the 6-position trimming guide at a medium length. Starting in the middle of your mustache, follow the lip line and taper with short upward strokes of the trimmer, working out toward the corners until a gentle shape is created on the bottom of your mustache.

As a finishing step, remove the trimming guide and, using only the bare blades, make a definitive line at the bottom of your mustache.